New York Oversize Permits

Navigating the complexities of New York oversize permits is crucial for transporting oversized loads across the state. Understanding New York State oversize load regulations and securing a New York DOT permit are essential steps to ensure compliance and safe travel on state roads. Whether you’re managing a heavy haul or planning routes, these regulations and permits play a vital role in successful transport operations.

New york DOT information

Validity of New York Oversize Permits

New York oversize permits are valid for five travel days, allowing sufficient time for transport while adhering to New York State oversize load regulations. In contrast, New York City permits are more specific, often valid for only a few hours depending on the load’s dimensions and the route. For the New York Thruway, permits typically last one to three days, depending on the journey.

Operating time of new york dOT permit

Travel under a New York DOT permit is permitted from half an hour before sunrise to half an hour after sunset, Monday through Friday. Saturday travel is allowed until noon if the vehicle does not exceed 12 feet in width, 85 feet in length, or legal height, and can maintain traffic flow speed. Overweight-only vehicles up to 96,000 pounds have the advantage of 24/7 travel. However, movement is restricted on major holidays and Friday afternoons before some holiday weekends. Night travel might be allowed or required in New York City, depending on the load’s dimensions.

Restricted travel conditions at new york

For vehicles exceeding certain dimensions, New York oversize load regulations impose additional restrictions. For instance, vehicles 14 feet wide, 14 feet high, and 90 feet long cannot travel through business districts during peak hours (7:00 a.m. to 9:00 a.m. and 4:00 p.m. to 6:00 p.m.). For larger loads (16 feet wide, 15 feet high, and 100 feet long or more), state travel is restricted during these times as well. No travel is allowed on major holidays, with shutdowns typically beginning at noon the day before.

Special Considerations for New York City

A separate New York oversize permit is required for New York City, where regulations are more stringent, and travel is restricted to either nighttime or daytime. Loads exceeding 10 feet in width, except on Interstates and truck routes, must move at night between 10:00 p.m. and 5:30 a.m., Monday through Thursday. For gross weights over 80,000 pounds, nighttime travel is mandatory, and a route survey is often required to obtain the permit. Special permission may also be necessary for certain bridges entering New York City.

New York Thruway permits

Traveling on the New York Thruway, including I-87, I-95, I-287, I-90, and I-190, requires a separate New York DOT permit. Loads taller than 13 feet 6 inches are not permitted on the Thruway.

Call (832) 454-5883 For Permit Consultation

Legal Dimensions for New York Oversize Permits

The following are legal dimensional limits for new york oversize permits. Permits are required if exceeding these dimensions.

• Length: 53 feet for semi-trailers on the Designated Highway system and New York Access Highways; 48 feet on non-qualifying highways, in NYC, and on the Thruway.
• Width: 8 feet 6 inches (8 feet in NYC and on roads with travel lanes less than 10 feet wide).
• Height: 13 feet 6 inches.
• Weight: 80,000 pounds gross. Specific axle weights apply.

Over Length Permit Exemptions

Permits are not necessary for loads consisting of poles, girders, beams, columns, or similar objects if only the legal length limit is exceeded. However, this exemption may not be applicable in the New York City area.

maximum limits for new york oversize Permits

Maximum dimensional limits allowed to be permitted at new york. Exceeding these dimensions can classify the load as a super load. Depending on the load require additional processing time and review.

• Length: No set amount: state determines on individual basis.

• Overhang:
• The maximum rear overhang should not exceed one-third of the length of the load, and two-thirds of this overhang must be supported on the trailer bed.
• Front overhang may not exceed 15′

• Width: The specific width is not pre-established; it is determined on an individual basis by the state. However, on the NY Thruway, the maximum allowable width is 16 feet.

• Height: 14′ and over (over 13′-6″ on Thruway) requires a route survey.

• Weight:

• Gross Weights
• 5 axles – 120,000
• 6 axles – 130,000
• 7 axles – 140,000

• Axle Weights
• Single – Depends on route and tire size
• Tandem – 50,000
• Tridem – 60,000
• Quad – depends on route/tire size

Registration is required for at least the amount of weight being permitted in New York.

Superloads

Any vehicle or combination which is:

• over 16′ wide
• 16′ or greater in height
• Over 160′ in length
• 200,000 pounds or greater in gross weight

is treated as a superload. At least two weeks are required for approval.

pilot cars requirements for New York Oversize Permits

• Length:

• 80′ to 99′-11″ – one escort
• 100′ and over – two escorts, three on two-lane highways
• 160′ and over – three escorts

New York City:

• Over 65′ long – one escort
• Going to Long Island requires 2 escorts

• Overhang: Over 10′ front or rear overhang – one escort.

• Width:

• Over 12′ – one escort
• 16′ and over – at least two escorts (three may be required)
• Over 16′ – police escort
• Over 15′ on NY Thruway also requires Thruway Traffic Safety Supervision Escort

New York City:

• Over 11′ – one escort
• Over 14′ – two escorts

• Height:

• 14′ and over – one escort with pole, and a route survey is needed to apply for permit
• Over 15′ may need to provide a bucket truck
• Over 16′ – police escort
• On Long Island, escort required for over 13’6 high

• Weight: For loads exceeding 200,000 pounds, a police escort is mandatory. Additionally, a police escort is required whenever a vehicle needs to centerline a bridge or highway. If the permitted vehicle cannot maintain normal highway speeds (within 20 mph of the posted speed), an escort is also necessary.

Route Surveys

• Length:

• NY State: 100′ and over requires route survey to order a permit
• New York City: over 80′

• Width:

• NY State: 16′ and over requires route survey to order a permit
• New York City: Over 12′

• Height:

• NY State: 14′ and over – route survey required to order a permit
• New York City: over 14′

Bridges at new york dot permits

The toll for most legal weight loads is $30.00. State bridges, such as the George Washington Bridge, charge the toll only one way if the vehicle is coming out empty, while city bridges charge the toll in both directions. Bridge permits are required for certain loads.

Signage and Lighting for new york Oversize loads

All oversize loads must display “Oversize Load” signs at the front and rear. Flags or lights are required at the extremities of the load. Amber warning lights are necessary for wide or high loads, especially when navigating New York City.

Conclusion

Securing a New York oversize permit and adhering to New York State oversize load regulations is crucial for safe and lawful transport. Understanding these requirements ensures compliance and helps avoid delays, fines, or accidents during the journey. For professional assistance in navigating these complex regulations, consider consulting experts who specialize in New York DOT permits.